Epoxy Flooring in Whitestown, IN

Few places in Indiana have added homes as quickly as Whitestown, and that shapes nearly every epoxy flooring job we do there. The town had 471 residents in 2000, 2,867 in 2010 and 10,178 in 2020, a 255% jump in that last decade. The 2025 estimate is 15,767. Most garage floors here are less than 15 years old.

What a young slab needs

Young concrete is usually flat and free of major damage, and that makes it a good candidate for a coating. Three things still need attention: 1. Cure and moisture. A slab only a year or two old may still be releasing moisture. We test before we schedule. 2. Surface prep. Builders leave a hard, smooth finish and often a curing compound. Grinding removes both. 3. Early cracks. Shrinkage cracks show up in most new garages. We fill them before the base coat.

In the 2020 census Whitestown had a homeowner vacancy rate of 0.4%, so most of these homes are owner-occupied and lived in. Coating a garage before it takes on years of stains and salt damage saves prep work later.

Commuting on I-65

Whitestown sits along Interstate 65 between exits 130 and 133, about 22 miles from downtown Indianapolis. A daily highway commute in winter means a car coated in brine every night. A sealed garage floor keeps that salt water on the surface. A full flake broadcast is the most practical finish for it, since it hides salt film between cleanings.

Get a Free Estimate

Commercial floors in Anson and beyond

Anson is a master-planned, mixed-use development begun in 2005 on about 6,500 acres south of the historic downtown. It now includes large stores and other retail and commercial space. We coat commercial floors here and elsewhere in town: back rooms, break rooms, storage areas, small shops and dealerships. We size the build and topcoat to the traffic, and we can plan the work around business hours.

A good fit for families

In 2020, 42.6% of Whitestown households had children under 18. Garages here double as bike storage, play space and a home gym. Flake and solid-color systems are easy to sweep and mop, and a light texture in the topcoat helps with footing.

A short list of prep steps

Every Whitestown floor goes through the same steps before the first coat:

• moisture test on the slab
• full diamond grind with dust collection, including the edges
• crack and control joint repair
• a final vacuum and inspection

Only then does the base coat go down, followed by the flake or color layer and the topcoat. You get written times for foot traffic, storage and parking.

Basements and bonus rooms

Some newer Whitestown homes have basements or lower-level bonus rooms that owners finish later. Coating the slab before walls and furniture go in is the easiest way to do it. A moisture test comes first, and we choose the primer based on the readings.

Keeping it looking new

A coated floor in a young subdivision usually needs little care. During salt season, squeegee out slush after storms and rinse the floor every few weeks. Wipe up oil or fuel when you notice it. Keep tire chains off the floor and use a plastic shovel inside the door. In spring, a mild cleaner and a soft mop take off the winter film. With that routine the topcoat keeps its gloss and the flake stays bright.

Builder warranties and timing

Some owners ask whether coating the garage affects their builder's warranty on the slab. That is a question for your builder, so check your paperwork before we schedule. We are glad to send a written scope of the work if your builder asks for one.